Products

Discount Air is proud to carry the best line of products available on the market. We proudly sell Armstrong Air. Armstrong offers a full line of quality, energy efficient products. 

Armstrong Air® Condensing Unit

Armstrong-Product-Cluster1

ds_digital’54696_005_V04.tif’ allied air_concord,ducane_ac & heat pump_14 seer L_3/4 left

The Armstrong Air air conditioner uses a brilliant approach to cooling called MHT Technology. In Armstrong Air’s proprietary heat transfer system, a specially designed fan shroud pulls air evenly throughout the air conditioner’s coil surface. The coil features rifled tubing to enhance refrigerant flow, while lanced coil fins increase surface contact between metal and air. All combine for maximum heat transfer and efficiency.

Armstrong Air® Furnace

ds_digital’54447_005_V01.tif’ allied air_arm,air ease 96V_enchanced 95,_advantage II 95_tech 95

 

Inside every Armstrong Air furnace, you’ll find our proprietary heat exchanger with EHX Technology. Stainless steel plates are crimped together, rather than welded, to reduce fatigue from heat strain and improve durability. Compared to conventional heat exchangers, the patented design offers more surface area for greater heat transfer, and advanced airflow properties allow more even heat distribution with no hot spots. As tough as it is dependable, EHX Technology is designed and tested to outperform our high standards and your expectations. Quiet SHIFT™ Technology Allows heat pumps to enter defrost mode without excessive noise. Since refrigerant pressure is allowed to equalize before the switch, the heat pump can dissipate performance-robbing frost and ice quietly. The burners inside every Armstrong Air furnace aren’t like the burners you’ll find in other furnaces. No detail was overlooked in their design, from their deeper, specially shaped fuel channels to the increased number of jets. As a result, Armstrong Air furnaces operate with extreme reliability, impressive efficiency and very low noise levels.

Armstrong Air®Handler

ds_trans '20499_41'

The Armstrong Air Handler comes in both a two-piece and a single piece design. With capacities from 1.5 to 5 tons, a variable-speed, single speed and constant torque blower motors. The Air Handlers are equipped with a factory piston or factory-installed TXV. The Armstrong Air Handlers that are equipped with variable speed motors can maintain consistent and even airflow. The variable speed motor featured on the BCS2V and EFV models gradually increases speeds from low to high. This helps keep noise levels to a minimum, remove humidity from your home and enhance indoor air quality. Both direct drive and variable speed motors are engineered to perform and built to last, so you and your family can always enjoy a cool and comfortable home.

  • Microban® Protection

    Drain pans are infused with an antibacterial agent that destabilizes the membrane of microorganism cells, disrupting the cellular function of odor-causing mold and bacteria so that they can no longer grow or reproduce.

  • Optional Heat Strips

    Dealer-installed heat strips add supplemental heat on extremely cold days.

  • Constant Torque Motor

    Like a variable speed air handlers, constant torque air handlers provide lower operating costs and increase overall system efficiency. Compared to standard PSC motors, constant torque delivers more consistent airflow and quieter operation.

MITSUBISHI MR. SLIM

dav2

Inverter-driven wall-mounted ductless indoor unit for residential applications. Operate quietly and efficiently to provide comfort in any room.

  • Rated capacities range from 9,000 to 34,600 Btu/h.
  • 5- year parts and 7-year compressor warranty will come standard to the original owner
  • Compact side discharge outdoor unit
  • Zone control
  • Quiet operation for both indoor and outdoor units
  • “Powerful Mode” function permits system to temporarily run at a lower/higher temperature with an increased fan speed, which quickly brings the room to the optimum comfort level
  • Wireless remote controller is included
  • Indoor unit powered from

    outdoorunit using A-Control

 

ALLIED COMMERCIAL™ E SERIES

The complete line of E-Series™ rooftop units represents Allied Commercial’s ongoing commitment to the advancement of heating and cooling technology in commercial applications. Designed to provide a low total cost of ownership, the E-Series unit helps reduce energy costs while being extremely cost-effective to service and maintain. With up to 18.0 SEER, the E-Series rooftop unit line achieves efficiency ratings up to 38% higher than U.S. Department of Energy minimum standards. E-Series units also offer exceptional peak load and overall energy usage reductions for commercial buildings. In fact, the E-Series line offers the highest number of units that surpass the Consortium for Energy Efficiency’s (CEE) Tier 2 EER levels for rebates (the highest currently available).

ALLIED COMMERCIAL™ K SERIES


K-Series™ rooftop units are known for precise, dependable performance. Also, because of its advanced features and thoughtful product designs, the K-Series is flexible, too, making it an excellent choice for virtually any commercial application. K-Series units are available in two configurations—standard and high-efficiency. Either unit can also be made up to 27% more efficient with the addition of an optional, single-zone VAV (Variable Air Volume) supply fan. High-efficiency models may also qualify for state and local utility rebates, helping you save even more.

ALLIED COMMERCIAL™ Z SERIES


The Z-Series™ delivers both value and flexibility, with proven performance. Available in 3 to 12.5-ton gas/electric, electric/electric and up to 10-ton heat pump models, Z-Series rooftop units are compatible with many replacement jobs and fit one of today’s most popular curb sizes. The Z-Series rooftop units feature the most popular footprint in the commercial industry, which eliminates the need for an adaptor curb in many replacement jobs, and allows installers to utilize existing utility connections.